S8 DSP

DSP

¡El ultracompacto S8 DSP es  la solución perfecta para integrar cualquier fuente OEM  en su proyecto de actualización de audio  para automóviles, motocicletas y barcos! S8 DSP es una esencia destilada de tecnología al servicio de la más alta calidad de audio en una carcasa libre de corrosión fundida en metal y materiales compuestos.

Facebook
Twitter
LinkedIn
General Specifications – S8 DSP
POWER SUPPLY
Nominal Power supply voltage / fuse:7 ÷ 20 VDC / 1A
Pulse operating voltage:5 ÷ 24 VDC
Idling current:0.34 A
OFF current (ART= OFF):<80 uA
OFF current (ART= ON):<80 uA
Remote IN6 ÷ 20 VDC (10 mA)
Remote OUT4 ÷ 20 VDC (150 mA)
ART – Automatic Remote Turn on/off from BTL speaker outputs (selectable):1.5 ÷ 7 VDC
Input Stage
Analog low level Inputs6 ch. (Differential input) (Molex microfit to RCAs)
Analog high level Inputs6 ch. (Differential input) (Molex microfit to tripped ends) + USS (Universal Speakers Simulator)
Digital inputsYes (Coaxial SPDIF; up to 24bit 96KHz) (Molex microfit to RCA)
Input sensitivity (low level)0.8V – 6V RMS
Input sensitivity (high level)2.5V – 21V RMS
Analog inputs managementAudio input routing matrix type
Analog inputs eq7 bands paragraphic for each input channel
ARTAutomatic Remote Turn-On/Off with Speaker-In
Output Stage – S8 DSP
Analog outputs (rca)8 channels
Max output level (rms) @ 0.05% THD4V
95dBAAnalog outputs managementThe DSP controls each output channel: gain, crossover, EQ, delay, polarity
Bandwidth10Hz – 40KHz (+/-3db)
Signal to noise ratio (A weighted)105dBA (Analog Input) 112dBA (Digital Input)
THD+N (@ 1Vrms out, @ 1Khz)<0.005%
Crosstalk (channel separation) @ 1KHz>95dBA
Digital Signal Processor
Sample rate96KHz
Bit depth24
Output equalizer15 bands per channel w/ adjustable Q and Frequency
Equalizer resolution1/10th dB per step +12dB / -12dB
Time alignment (distance)0 ÷ 468.4 cm / 0 ÷ 184.4 inches
Time alignment (time)0 ÷ 13.5ms
Time alignment (step)0,08 ms; 2,8 cm / 1.1 inch
Time alignment (fine set)0,02 ms; 0,7 cm / 0.27 inch
CrossoversAP/HP/LP/BP all channels
Crossover typeButterworth, Linkwitz-Riley, Bessel (All Channels)
Crossover slopeFrom 6dB/oct. until 30dB/oct. (6dB step)
Crossover steps120 steps 20Hz-20KHz
Mute functionEach channel individually, or all channels.
Presets4 presets
Presets selection2 specific wires to control the 4 presets selection by extarnal switches.
Input selection by wireOne specific wire to select the desired input between Analog or Digital.
Audio signal compressor on output stageYes (enable/disable)
DSP chipsetAnalog Device: ADAU1451
DSP management by bt app (iOS/ Android)1. CONFIGURATOR mode Mainly it’ll allow the DSP tuning. You can manage every DSP functon through your smartphone/ tablet/PC/MAC. 2. DRC mode The BT device becomes a remote control by using the dedicated app with a simple graphical user interface. Manage volume level, SUB level, select different setup files, upload a new setup file.
Setup file sharing via btUpload a setup file via BT through the BT APP when in “Configurator” or “DRC” mode.
DSP management by pc / mac / ios / androidMicrosoft Windows (32/64 bit): Windows 10 (USB and BT BLE) Windows 11 (USB and BT BLE) Mac Os: 10.13 Hight Sierra or later (USB and BT BLE)
Physical Specs

S8 DSP

Max size W x H x D (mm/inch)130 x 33.8 x 88,3 / 5.11 x 1.44 x 3.47
Weight (kg/lbs)0,66 / 1.45
¿Consultas? Chatea con nosotros